Water Level Logger Dipper PT
- Internal Data Backup
- Lithium Batteries for Life
- 32 Bit Processor
- Watchdog Processor
- Integral Vented Pressure Transducer 0.05%
- Minimum Bankside, Just a cable
- YouTube Hydrokit Resource - Click to View
The DIPPER PT is a low cost, data logger with a very accurate VENTED (+/- 0.05%) integral depth transducer.
The Dipper PT is secured at the lowest point in the stream and logs the head of water pressure above it.
Best installed in a stilling well or protected in a simple pipe structure. It can be used for water discharge & stage measurement in lakes, estuaries or rivers or tanks.
Up to 480000 measurements can be memorised on a ring memory. Data, which is resident on the ring memory, is also backed up on a 1MB Flash-RAM as data security in case of a complete power failure.
There is a watchdog function integrated within Dipper PT which constantly supervises the 32 bit microprocessor activities, any undefined system conditions are recognised and eliminated by the watchdog function.
Down loading the data to a notebook PC, or PDA is carried out without disturbing the position of the immersed Dipper unit.
Due to the use of vented cable no barometric compensations are required.This is a far more accurate system that those using barometric compensation methods.
Data is downloaded via easy to use Windows software. Actual real time values can be displayed.
Dipper-PT and Dipper PTEC versions available to measure water level/temperature/conductivity
Applications featured in Case Studies Section - see Surface Water Monitoring
Download Specification (PDF Format)
Universal Data Up-Load Cable
< More Info >